Free Trial In Here (updated again November 2nd)

Running Compatibility Test

Download, extract and run ZPEcompatibility_test.exe from here.

You should see a GUI with orange label, like below.



Next you press the Test button, and wait for tool to complete.
if successful you will see the label turn from orange to green, and the Code button will
become active, like below.



If Test was successful, you should now press the Code button, to see an info GUI like below.
It shows the code that you need to send to me via PM in order for ZPE 2013 to work.
It is copied into your clipboard, so you can just right click and select paste, or press Ctrl +v.



If the Test was not successful you will see label turn from orange to red, like below.



There could be many reasons this might happen, and I do not know them all, but you might
try running the test as Administrator, by right clicking on ZPEcompatibility_test.exe and
selecting Runas administrator .

If Compatibility Test reports that winpcap is not installed, you must install it.

If it is installed, then at this time I do not have a solution to that problem.