|
Post by parker13 on Sept 7, 2010 14:28:06 GMT
I can set my big and small blinds to 200/400, 10xBB, record the seats in a 200/400 table and it works fine, but If i go to say a 5K 10K table, record the seats, adjust my small blind to 5K and big to 10K, 10xBB the cursor keeps scrolling through the tables, says no table found, finds another server and does the same, Have tried entering 5000 and 10000 as well but behaves the same,If I go back to a 200/400 table, record the seats etc and change the blinds in settings again it will work fine, seems I can only play the 200/400 tables, I have gone to Data, seats and deleted the 1 to 9 seats, nothing else and still the same, is there something simple I am missing ?
|
|
|
Post by fleetfanatic on Sept 7, 2010 17:51:51 GMT
I presume that you mean betabot, please post in the VIP section, and for a point to note, you only need to record your seats ONCE for ALL tables.
Just set min and max to 10k and try. I always set my min & max to the big blind value.
|
|
|
Post by parker13 on Sept 7, 2010 21:12:42 GMT
Cheers for the reply, sussed you have to set min and max the same, didn't realise you only had to record the seats once though, many thanks.
|
|