|
|
Post by quincyg on Jul 5, 2013 15:33:31 GMT
Not 100% sure where to put this.
I got it running, got it to sit in and fold a raised preflop, but no matter what happens, it will not play past the first loop. if it cheks, as it's supposed to, the next time it comes around it won't play... ever. i have to stop and restart it.
is this a known issue?
|
|
|
|
Post by Mick on Jul 5, 2013 16:07:28 GMT
It's not a known issue, I have never seen that behaveiour before.
Are you starting the bot from lobby?
|
|
|
|
Post by quincyg on Jul 6, 2013 1:00:18 GMT
yes, using ie 10. It finds the table and sits fine. Through the first cycle, before it starts a live hand, it fills the cells in as the hand progresses.
once the hand is over, it reads the hole cards and reports them when the new hand is dealt along with the action to take. once that action happens, it's over. it no longer records the turns, or anything else. most times it requres a complete restart of ie and the bot, but frequently it will not work again until i reboot
|
|
|
|
Post by quincyg on Jul 6, 2013 1:05:39 GMT
disregard this post
|
|
|
|
Post by quincyg on Jul 6, 2013 1:22:53 GMT
Also, it sometimes goes back out to the lobby, and repeatedlly changes casinos, and tries connecting to the tourney tab. once in this loop, it doesn't stop.
when playing the hand, and after the first action, the bot immediately loses the window that was populated with the hole cards and no longer functions. so whatever is happening seems to be instant once the initial action i over.
i used the default profile, changing of course my username and player name. but left everything else defaulted.
i also noticed that at any time, if i try running 'test' i get a generic windows program failure.
i am going to run some system updates, and see if i can isolate the failure using the event viewer, then i'll report the findings.
|
|
|
|
Post by quincyg on Jul 6, 2013 4:00:04 GMT
ugh. well, i have no errors or warnings in the event viewer that i can see so i'm not sure how i'm going to trace this...
bummer.
all i can say is that it's consistent, it's never played past the first action. and when it performs that action, it immediately loses all the values from the hand. it's almost like it's kicking itself off. hard to track unless you've got some suggestions i can pursue.
I'll keep working from my end, i'm just not sure where to go.
|
|
|
|
Post by Mick on Jul 6, 2013 10:17:14 GMT
I'd have to say that this issue must be local to your machine, and/or software on it.
If you can be bothered to make a video of this behaviour from bot start to the problem, that might possibly help diagnose.
If you do and are uncomfortable posting it here, then send vid url via PM.
It's very unusual indeed.
|
|
|
|
Post by quincyg on Jul 6, 2013 12:25:53 GMT
hi Mick,
i have no problem recording a video of it happening. i'll just mask out the player. i've been up for a long time working so it will be later tonight.
|
|
